Weight per sq. m: 25 Kg
Units per lm ridge: 2.5 Celler® 50×21 roof tiles
Units per lm edge: 2.5 Celler® 50×21 roof tiles
Max. overlap: 17.0 cm
Min. overlap: 8.0 cm
Recommended support: Metallic or Treated Wood Battens (*)
Dry installation using: Screws or nails (depending on the support)
Roof Tiles per pallet: 160 units / 420 Kg.
Minimum order: 8 roof tiles
Step roof tile with nibs on its underside, is placed in the pan position, essential for the proper drainage of water in the C-50.21 Celler® roofs by dry-installed on battens or continued support. It also is equipped with a hole to secure nail or screw through the batten.
To ensure their optimal installation, C-50.21 Celler® roof tiles should be installed using the STEP® 50/45 as a pan and should be fixed to a support previously prepared with a double batten layout.
Curved roof tiles can also be dry installed on under-tile Corrugated bitumen sheet or Fiber cement sheets.
Watch video for fitting instrutions on YouTube.
Approximate values: Installation must comply with Code of practice for the design and fixing of roofs with clay roofing tiles for the region and Tejas Borja specifications.
CE Marking on a product is a manufacturer’s declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives.
AENOR ensure compliance with the requirements of the European standard applicable to each product, demonstrating compliance with the requirements of customers and regulations applicable in your case.
Roof tiles and special pieces of fired clay AENOR certificate are suitable for covering roofs and vertical cladding walls.
The Golden Alfa Innovation Award was given by the Spanish Ceramic and Glass Society for the development of SKIN-KER® by Tejas Borja, an installation system that creates a self-ventilating roof with large-format and extensive flat ceramic façade tiles, wrapping the whole building in a product of equal quality and appearance. (2012)
1st Hispalyt Ceramic Roof Tile Architecture Prize for the restoration of “Las Reales Atarazanas de Barcelona”. (2013)
1st Hispalyt Ceramic Roof Tile Architecture Prize for the new construccion project: “House S” (2015-2017)
The Valencia Chamber of Commerce awarded Tejas Borja with Award for Internationalisation in recognition of the expansion that the company began more than two decades ago. (2009)
Best exterior product of the year Price. Award given to the Flat 10 roof tile by the Editorial Board of Architecture Ireland at Architecture Expo Dublin. (Architecture Expo Show 2014)
Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.ACEPTAR
TEJAS BORJA, S.A.U.
Ctra. Llíria a Pedralba km 3
46160 Llíria, Valencia, SPAIN
Tel.: +34 96 279 80 14
Fax: +34 96 278 25 63